 |
Backsaver Lift™
| |
Choose from over one million variations. Capacities of 2000, 4000, and 6000 lbs. Lifting heights up to 56". Higher capacity and lifting heights are available.
Backsaver Lifts can be furnished with conveyor tops, turntables, tilt tops and a wide range of other options to provide the added measure of control, safety, portability or convenience that best suits the application.
|
|
|
 |
Backsaver Lite™
| |
If you lift loads of 1500 lbs or less, you can have heavy-duty, highly reliable, industrial grade lift tables without paying for extra capacity you can't use. Models are available for different capacity, power, stationary and portability requirements. |
|
|
 |
Backsaver Lite™ Compact
| |
Available in capacities of 500 and 1000 lbs. The double-scissor mechanism allows up to 36" lifting height with a footprint as small as 12" x 24". Portability options are available. |
|
|
 |
Pneumatic Lift Tables
| |
These rugged, powerful lift tables can be used anywhere that "shop air" is available. They can handle loads of up to 4000 lbs with as little as 80 psi. Because they are pneumatic, there is no risk of process contamination. |
|
|
 |
Flush Mount Turntable Lift
| |
All the features of a standard Backsaver Lift plus the rear side positioning convenience of a built-in turntable. Exclusive design is set in flush to the table in a clean, uncluttered design with no significant increase in lowered height. The turntable is rotationally locked when the lift is in the full down position. |
|
|
 |
Floor Height Lift Tables
| |
Lowers flat to floor level and is designed for safe hand truck accessability. You can roll on a floor truck or hand pallet jack easily. Elastomeric front edge helps protect against toe injury.
back to top |
|
|
 |
LIFTMAT™ Lift Tables
| |
In facilities can not be built, you can still have the advantage of full four side accessability with a roll-on lift table. The LIFTMAT™ has a collapsed height as low as 2.8", capacities to 4000 lbs, lift height to 35" and platform sizes to 48" x 96". |
|
|
 |
Tandem Lifts
| |
You can double the length, width, or both of standard lift tables by using tandems. These lifts are idea for long or wide loads such as lumber, sheets, pipe, bar stock and long assemblies. |
|
|
 |
Heavy-duty Lifts
| |
For heavy bulk loads, these extremely rugged, strongly reinforced tables are ideal. They can lift loads to heights over 8 feet. Standard models up to 25,000 lbs, and custom designs for greater capacities are available.
back to top |
|
|
 |
Spacesaver™ Lifts
| |
Up to 144" of vertical travel with minimum platform size is made possible through the use of multiple scissor mechanisms. These lifts are extremely stable and are ideal for use as mezzanine lifts, cargo lifts, positioning tables and in automatic palletizing. Capacities to 12,000 lbs. |
|
|
 |
E-Z Reach™ Tilter
| |
Fork pockets allow container to be placed on E-Z Reach™ Tilter by either fork lift or hand pallet jack. |
|
|
 |
E-Z Reach™ Portable Tilter
| |
E-Z Reach™ Portable Tilters have casters that allow them to pick up staged containers and move them to work stations. Available with AC or DC power.
back to top |
|
|
 |
E-Z Reach™ Universal Tilter
| |
The wide pan of the E-Z Reach™ Universal Tilter allows all types of containers to be placed directly on the tilter by fork trucks or hand pallet trucks. The wide pan accepts oversize containers. |
|
|
 |
E-Z Reach™ Lift and Tilt
| |
Precisely position containers with independent control of lift and tilt angle. Can be furnished with various capacities, platforms and degrees of tilt. |
|
|
 |
Stack Box Feeder / Positioner
| |
Adjusts for loading and unloading parts from totes, junior containers and stock carts. Dollies roll into adjustable forks.
back to top |
|
|
 |
PalletPal® Level Loader (Spring Actuated)
| |
This simple, automatic unit incorporates a turntable to allow nearside loading and an easy to use mechanical spring system which lowers and raises the unit to maintain a constant loading level. As pallets are built up and broken down, no power or air supply is required. Pallet loads to 4500 lbs. |
|
|
 |
PalletPal® Level Loader (Pneumatic Option)
| |
All of the positioning advantages of the original PalletPal®, but designed for use where pallet loads very widely and are changed frequently. The airbag spring combination provides virtually linear response while maintaining a constant working height. Load range 500 to 4500 lbs. |
|
|
 |
PalletPal® Disc Turntables
| |
Low-profile design, less than 1" high, allows PalletPal® Disc Turntables to accept a hand pallet jack. By rotating the load, the operator always works from the near-side without walking around the pallet.
back to top |
|
|
 |
PalletPal® Stretch Wrappers
| |
Simply wheel a loaded pallet onto the disc and move the stretch wrapping wand up and down the mast as the powered turntable spins the load. Dramatically improves productivity and safety over hand wrapping. |
|
|
 |
Roll-On™ Level Loader
| |
Lowers to floor height so pallets can be rolled on with a hand pallt jack. The operator can adjust to convenient working height. Narrow side panels virtually eliminate reach-over and a front edge photo eye provides operator protection. |
|
|
 |
Pallet Rotators / Skid Turners
| |
For transferring skid loads from one skid to another or from skid to slip shoot.They are also ideal for removing torn bags and other damaged goods that are typically found on the bottom of most stacks. The unit clamps and then rotates 180°.
back to top |
|
|
 |
Dandy™ Lifter / Transporter
| |
Essential wherever lifting, positioning, assembling, stacking, unstacking, transporting or the need for an adjustable height work surface is part of the job. The Dandy™ Lift is available in capacities up to 1760 lbs. |
|
|
 |
The ELPH™
| |
Ideal for any white coat industrial application including: electronic assembly, laboratories, clean rooms or any place wharee a clean, quiet, versatile little helper can be used. Driven by a DC motor and linear actuator, there are no concerns of hydraulic fluid leakage. Fully charges in four hours from a standard 110 V AC outlet. |
|
|
 |
High Lift Dandy
| |
With the ability to lift loads as heavy as 770 lbs to heights of over four feet, the A-350 Dandy™ Lift is ideal for order picking from storage shelves, positioning parts or sub-assemblies in assembly operations or any other application requiring the ability to transport and lift shoulder heights.
back to top |
|
|
 |
Dandy Leveler™
| |
Spring actuated platform can deliver the load and then automatically adjust for level feeding and offloading. Spring tension adjusts for varying loads. |
|
|
 |
Pallet / Skid Dandy
| |
F500 L and M500 L Dandy lifts are designed for transporting loads on skids, multi-legged composite pallets or containers. They have a capacity of 1100 lbs and can be raised and lowered to an infinite number of positions within their working range by means of a foot pedal activated haydraulic pump. |
|
|
 |
Vertical Conveyors
| |
With capacities to 4000 lbs and standard elevations up to 22feet, vertical conveyors carry loads to lofts, basements, mezzanines, and upper stories safely and efficiently.
back to top |
|
|
 |
Dock Lifts
| |
You can save the high cost of dock construction, work from any truck bed level to grade level and handle unstable loads quickly and safely with Dock Lifts. These lifts can be installed indoors or outdoors and will handle loads of up to 20,000 lbs. |
|
|
 |
Coil Cars
| |
Extremely rugged scissor-lift mechanism and powerful hydraulics make it possible to lift, transport and feed jumbo rolls and coils with weights up to 70 tons. |
|
|
 |
Roll Handling Tables
| |
Lifting heavy rolls for transport for loading and loading processing machines is a simple, one operator job with our roll handling tables. They can be combined with other products to create complete roll handling systems.
back to top |
|
|
|
